Other GRINNELL Regions  |  Contact Us  |  Login
GRINNELL Americas

Mechanical Products
Results Found: 16

CAD_Mech_Off

672: Rigid Couplings

The GRINNELL Figure 672 Rigid Coupling provides a rigid joint that firmly grips the entire circumference of the tube. This coupling is a proven, dependable method of joining copper tube and an economical alternative to soldering (sweating) joints.

Pricing / Sizes Data Sheet: G510 Submittal Sheet Install Sheet: G960

640: Pivot-Bolt Rigid Coupling

The GRINNELL Figure 640 Pivot-Bolt Rigid Coupling joins rolled grooved, hard-drawn copper tubing systems (CTS). It provides a rigid joint by firmly gripping the entire circumference of the copper tube groove.
The Figure 640 Pivot-Bolt Rigid Coupling is capable of pressures up to 300 psi (20,7 bar).


Pricing / Sizes Data Sheet: G512 Submittal Sheet Install Sheet: G904

616: Reducing Coupling

Figure 616 Reducing Coupling for Joining Copper Tubing Systems The GRINNELL Figure 616 Reducing Coupling allows a direct reduction between two different CTS copper tubing sizes and eliminates the need for a concentric reducer and couplings. The epoxy coated ductile iron coupling housings help to eliminate galvanic local cell and stray current problems, and a specially designed rubber gasket prevents the smaller tube from telescoping into the larger tube during vertical installation.

Pricing / Sizes Data Sheet: G511 Submittal Sheet Install Sheet: G961

617: Transition Coupling

The GRINNELL Figure 617 Transition Coupling provides for a direct connection between grooved end IPS steel pipe, fittings or valves, and grooved end CTS copper tubing eliminating the need for a dielectric waterway transition fitting and couplings. The coupling is comprised of two ductile iron housings, a specially designed pressure responsive rubber transition gasket, and track bolts and nuts. The rubber gasket isolates the fluid from the coupling housings and the epoxy coated housings help to eliminate galvanic local cell and stray current problems.

Pricing / Sizes Data Sheet: G513 Submittal Sheet Install Sheet: G962

61H: Hinged Flange Adapter

The Figure 61H Hinged Flange Adapter allows for a direct connection of grooved-end copper tubing with ANSI class 125/150 (steel) or ASME B16.24 (copper) class 150 flanged components without the need for heat or lead. Available in sizes 2 to 6 inches (50 mm to 150 mm), the Figure 61H is comprised of two identical ductile iron flange segments, and a pressure responsive gasket. The pressure responsive gasket seals on the outside diameter of the copper tubing and isolates the flange segments from the internal fluid. Pressure rating of up to 300 psi (20 bar) can be achieved depending on the size and type of copper tubing being used.

Pricing / Sizes Data Sheet: G516 Submittal Sheet Install Sheet: G907

61: Flange Adapter

The GRINNELL Figure 61 Flange Adapter provides a direct transition from flanged components to GRINNELL grooved copper components. Flange bolt patterns conform to ANSI Class 125 and 150 standards.

Pricing / Sizes Data Sheet: G515 Submittal Sheet Install Sheet: G970

610: Grooved 90° Elbow

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

601: Grooved 45° Elbow

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling, Figure 640 Pivot-Bolt Rigid Coupling, or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

619: Tees

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

660: Caps

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

650: Concentric Reducer Grooved

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

652: Grooved Reducer Grooved X Cup

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

621: Reducing Tee Grooved x Grooved x Grooved

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

618: Reducing Tee, Grooved x Grooved x Cup

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling, Figure 640 Pivot-Bolt Rigid Coupling, or the Figure 61 Flange Adapter for Copper Systems.

Pricing / Sizes Data Sheet: G520 Submittal Sheet

B680: Copper System Butterfly Valve Grooved, EPDM

The GRINNELL Model B680 Butterfly Valve is for use with grooved copper tube (CTS) piping systems. It provides for efficient control of fluid in piping systems and has a 10 position locking lever handle. Flow may come from either direction, and the valve may be positioned in any orientation. The B680 features a bronze body and a disc that is fully encapsulated with EPDM rubber for potable water service.

Pricing / Sizes Data Sheet: G530 Submittal Sheet

Tools: Groover Mini-Mite 2" - 8" Copper Tube, Model #1039-66, Ratchet Hand Crank or Chucked into a Rigid 300

Mini-Mite roll groovers allow you to handle anything when you get on the job site. They are handy, portable jobsite tools that can save you hours of waiting for pipe to come back from the shop. New design has roller bearing front and back on main shaft.

Pricing / Sizes Data Sheet: G720 Submittal Sheet


Copyright © 2014 Tyco Fire Products, LP. All Rights Reserved   Toll Free: 800-558-5236 | Tel: +1-401-781-8220 | Privacy Policy | Terms of Sale | Careers
Tyco Mechanical Products