Page 135 - GRINNELL Mechanical Products Catalogue

HDpE SySTEmS
The Figure 9094 HDPE Flange Coupling provides for an efficient transition from high-density polyethylene (HDPE) piping to ANSI class 125# or 150# flanged piping system . This coupling is ideal for mining, irrigation, and tunnelling applications .
Figure 9094 Flange Couplings
Tech Data Sheet: G584
BC
A
Pipe Size
Dimensions - mm Inches
Coupling Bolts ‡
Approx. Weight kg Lbs.
Nominal mm Inches
O.D. mm Inches
A
B
C
Quantity
Bolt Size
Inches
100
4 6 8
4.500 9.00 6.625 11.00 8.625 13.50
10.25 12.25 14.75
3.10 3.75 3.42
8 8 8
5⁄8 x 3-1⁄4 15.0 3⁄4 x 3-1⁄2 21.5 3⁄4 x 3-3⁄4 28.8
114.3
229.0
260.0
79.0
6.8
150
168.3
279.0
311.0
95.0
9.8
200
219.1
343.0
375.0
87.0
13.1
‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger. It is the responsibility of the purchaser to verify correct length for the intended application.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 134 for HDPE coupling specifications, and see pages 140 - 146 for gasket information.
Pipe Size
Pipe Wall Thickness and Standard Dimension Ratio
Nominal mm Inches
O.D. mm Inches
Tol. +/- mm Inches
Max. Pipe Ovality +/- mm Inches
SDR 7.3 mm Inches
SDR 9 mm Inches
SDR 11 mm Inches
SDR 15.5 mm Inches
SDR 17 mm Inches
SDR 21 mm Inches
SDR 32.5 mm Inches
100
114.3
0.51
1.02
15.6
12.7
10.4
7.4
6.7
5.4
3.5
4
6
8
4.500 0.020
6.625 0.030
8.625 0.039
0.040
0.050
0.075
0.616
0.908
1.182
0.500
0.736
0.958
0.409 0.290 0.602 0.427 0.784 0.556
0.265 0.214 0.327 0.265 0.507 0.340
0.138 0.204 0.265
150
168.3
0.76
1.27
23.1
18.7
15.3
10.8
8.3
6.7
5.2
200
219.1
0.99
1.91
30.0
24.3
19.9
14.1
12.9
8.6
6.7
Per Specification for Polyethylene (P.E.) Plastic Pipe ASTM F714, D2447, D3035.
Refer to back cover for country-specific customer care numbers.
135
HDPE SyStEmS